Hardwood Flooring Repair – Repairing Scratches, Dents, and Cracks
Hardwood flooring installation is a complex task requiring many skills, patience, and tools. Hardwood Flooring Repair Chicago also involves a lot of thought about the best installation method for each floor. Common hardwood flooring installation methods include nailing down, stapling down, gluing down, and floating. Each of these installation methods has its pros and cons.
Whether from pets, furniture, or daily wear and tear, wood floors are vulnerable to scratches, dents, and cracks. While some of these can be repaired, others require replacement. If the blemish is on the surface, you can fix it with sanding and staining. But you might have to replace the whole floor if it’s deeper.
Scratches on hardwood floors can ruin your floor’s look and cause it to look dingy and worn. Depending on the extent of the damage, sanding and refinishing may be necessary.
Minor scratches, however, can be easily repaired without much effort. These are called superficial scratches, and they tend only to impact the top surface of the wood.
You can make a solution of equal parts apple cider vinegar and olive oil for shallower scratches. According to Family Handyman, this solution is often effective at hiding minor scratches on newer floors that have a fresh finish.
Applying a thin coat of coconut oil can also minimize scratch marks on older floors that have been sanded or stained but still need to finish. This oil contains natural emollients that soften and repair bare wood.
You can fill in the scratch with stainable wood filler for deep scratches that reveal bare wood. Once dry, sand the scratch down to blend with the grain of the wood.
Dents on hardwood flooring can occur in a variety of ways. These include heavy furniture, high heels, and pet claws.
Denting on finished wood is fairly easy to fix. Just add a small amount of water to the dent and let it sit for a few minutes.
When the finish dries, the dent should disappear. However, if the dent is not completely gone, you can apply another application of water and heat.
Depending on the type of wood, you may need multiple applications to remove a dent. Soft species, such as pine, may only need one or two, while harder woods like oak or ash, may require up to four.
Regardless of the cause, dents on wood floors can be annoying and can ruin their look. However, they’re a natural part of hardwood floors, and several ways exist to repair them. These tips and tricks will help you keep your hardwood floors looking their best for years to come.
Hardwood floors can be damaged by water for a variety of reasons. If you have had a recent flood, leak from a faucet or washing machine failure, it is important to act quickly to save your hardwood flooring.
The longer the water is left on the wood, the more damage it does. It only takes a few days for fungi and mold to start growing.
As soon as you notice any signs of water damage, call a restoration specialist right away. They can help you assess the extent of the damage and determine what repairs are needed to restore the floors.
Once the water is removed, you first need to scrub your hardwood floors to remove any impurities. This will help you avoid permanent damage to your floors.
If you have older tongue-and-groove or wide-plank flooring, gaps will develop between boards as the wood dries out and shrinks. These gaps become dirt magnets and are especially troublesome on floors that are above a furnace room or other areas of dry heat.
Gaps can also occur as the result of water damage. Leaking refrigerators and dishwashers can wreak havoc on hardwood floors, causing water to pool and damage the wood.
Fortunately, damaged planks can be easily replaced. If your floor is made of tongue-and-groove wood, you can cut out the damaged section without damaging the rest. Before replacing the damaged section, you must figure out how much you will need. This will help you choose the right replacement board.
Hardwood flooring installation is a big project and can be incredibly expensive. It typically includes removing old flooring, cleaning the room, setting up the new floor, and preparing the subfloor for installation.
Hardwood flooring installation costs vary depending on the wood type, size, and floor style. It also depends on the labor and materials used for installation.
Generally speaking, the average cost of installing hardwood floors is $6-$12 per square foot. It can be higher for larger rooms and for those with more complex layouts, like a non-traditional floor plan or lots of alcoves and corners.